|
|
|
|
|
|
| |
 |
| Tuotteet |
| |
|
|
| |
 |
|
| ADHESIVES |
 |
|
DW 1000
Cement-based adhesive, for the adhesion of ceramic tiles.
Product classification
DW 1000 is classified as C1E according to EN 12004, base C cement, Nr.1 adhesive with normal adhesive strength, E – prolonged time of workability....
Brand: Dast
|
|
|
DW 1100
Cement-based adhesive, for the adhesion of ceramic tiles
Product Classification
DW 1100 is classified as C1TE according to EN 12004, base C cement, Nr. 1 adhesive with a normal strength of adhesion, T anti-slip,
E – prolonged time of workability
...
Brand: Dast
|
 |
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW 2000
Cement-based adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles.
Product Classification
DW 2000 is classified as C2T according to EN 12004, base C - cement, Nr. 2 - adhesive with high adhesive strength, T - resistance to slip.
Charact...
Brand: Dast
|
|
|
DW 2200 RAPID
Cement-based, fast drying adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles.
Product classification
DW 2200 RAPID is classified as C2F according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, F fast final drying.
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW 2200 RAPID PLUS
Cement-based, bi-component, very flexible adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles in hard surfaces.
Product classification
DW 2200 RAPID PLUS is classified as C2FTE S2 according to EN 12004, base C cement, 2 adhesive with high ad...
Brand: Dast
|
|
|
DW 3000
Cement-based and flexible adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles.
Product classification
DW 3000 is classified as C2TE S1 according to EN 12004, base C cement, 2 adhesive with high adhesive strength, T resistance to slip, and E
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW 3000 PLUS
Cement-based adhesive, for the adhesion of ceramic tiles
Product Classification
DW 1100 is classified as C1TE according to EN 12004, base C cement, Nr. 1 adhesive with a normal strength of adhesion, T anti-slip,
E – prolonged time of workability
...
Brand: Dast
|
|
|
DW 5000
Thixotropic, elastic, ready to use adhesive; its base consists of the water dispersion of polyacrylic esters and special additives.
Product Classification
DW 5000 is classified as D2TE according to EN 12004, dispersion base, 2 improved adhesive strength, E ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW 7000 EPOXY
Two component epoxy base tile adhesive, free of solvents. It is characterized by high resistance to compression, flexural and adhesive strength. DW 7000 EPOXY is resistant to some acids, alkalis, corrosive concrete agents, cleaning agents, sea water and salt water.
Brand: Dast
|
|
|
DW 7100 EPOFAST
Free of solvents. It is characterized by high resistance to compression, flexion and adhesive strength. DW 7100 EPOFAST is resistant to some acids, alkalis, corrosive concrete agents, cleaning agents, sea water and salt water.
Product Classification
Accordi...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW 9000 EPO-UNI
Is a bi-component tile adhesive, free of solvents. It is characterized by high resistance to compression, flexion and adhesive strength. DW 9000 Epo - Uni is resistant to some acids, alkalis, corrosive concrete agents, cleaning agents, sea water and salt water. The p...
Brand: Dast
|
|
|
DW CONEXION 55
Cement-based adhesive, for the adhesion of thermal insulation EPS
panels.
Characteristics
- High adhesion to mineral substrates and EPS panels
- Very good workability
- Resistant to weather conditions
Area of use
DW Conexion 55 is cement-...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW CONEXION 77
Prepared,grey and white cement-based mortar, composed from Protland Cement with excellent qualities, carbonate stone filler with selected granulometry, synthetic resins and special additives, which improve the workability, adhesion and increase the hydrophobicity of ...
Brand: Dast
|
|
|
DW CONEXION 99
Prepared,grey and white cement-based mortar, composed from
Protland Cement with excellent qualities, carbonate stone filler with selected granulometry, synthetic resins and special additives, which
improve the workability, adhesion, flexibility and increase the...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW CONEXION FOAM ...
Polyurethane-based, mono-component, with low expansion adhesive for thermal insulation panels. It is suitable to seal thermal insulation materials with the help of a pistol for PU foam. The foam is hardened in reaction with air humidity.
Characteristics
D33...
Brand: Dast
|
|
|
DW CONEXION PLUS
Serves to fix the thermal insulation panels EPS, mineral panels, and to apply a thin layer reinforced with mesh for the thermal insulation of buildings.
Characteristics
- No need to apply a primer before applying the product
- Lower consumption
- High...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW FIRE
Refractory mortar, with cement, synthetic resins and special additives for environments of high temperatures.
Characteristics
Cement-based powder for environments with high temperatures and high mechanical resistance, for fillings in a thickness of 20 mm/la...
Brand: Dast
|
|
|
DW GRANDFIX
Cement-based, flexible adhesive, for the adhesion of natural stone tiles.
Product Classification
DW GRANDFIX is classified as C2TE according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, T resistance to slip, and E prolonged working...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW HOLZFIX
Cement-based, bi-component, very flexible adhesive, for the adhesion of ceramic, gres, porcelain, etc, tiles in hard surfaces.
Product Classification
DW HOLZFIX is classified as C2S2 according to EN 12004,, base C
cement, 2 adhesive with high adhesive st...
Brand: Dast
|
|
|
DW KLEBEMORTEL 2.5
Cement-based, flexible adhesive, for the adhesion of ceramic, gres,
porcelain, etc, tiles.
Product classification
DW Klebemortel 2.5 is classified as C2TE according to EN 12004, base C cement, 2 adhesive with high adhesive strength, T resistance to slip...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW LINOLEUM ECO 4...
Adhesive for the mounting of linoleum flooring, with water-based dispersion and free of solvents.
Characteristics
- DW LINOLEUM ECO 410 is a synthetic, water-based emulsion adhesive, and free of VOC-s.
- DW LINOLEUM ECO 410 ensures a high adhesion even i...
Brand: Dast
|
|
|
DW MARMOFLEX
Cement-based and flexible adhesive, for the adhesion of marble and granite tiles.
Product Classification
DW Marmoflex is classified as C2TE according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, T resistance to slip, and E prolonge...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW PARQUET F 22
Fast drying adhesive for water-based dispersion wooden floors, free of solvents.
Characteristics
- DW PARQUET F 22 is a synthetic, fast drying, water emulsion-based and with low water content adhesive
- DW PARQUET F 22 solidifies even in temperatures nea...
Brand: Dast
|
|
|
DW PARQUET FS 44
Bi-component, polyurethane-based, with very low emission of volatile organic compounds, VOCs adhesive for all types of parquets.
Characteristics
- DW PARQUET FS 44 is a bi-component adhesive.
- DW PARQUET FS 44 solidifies even in temperatures near freezi...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW PARQUET S 33
Silylate polymer-based adhesive for wooden parquets, with very low emission of volatile organic compounds, VOCs.
Characteristics
- DW PARQUET S 33 is a synthetic, ready –to- use adhesive.
- DW PARQUET S 33 solidifies even in near- freezing temperatures. ...
Brand: Dast
|
|
|
DW PVC ECO 110
Fast drying, water-based dispersion adhesive for the adhesion of PVC-s, solvents-free.
Characteristics
- DW PVC ECO 110 is a synthetic, fast drying, water emulsion-based
adhesive, free of VOC - s.
- DW PVC ECO 110 has a high adhesiveness, even from th...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW RUBBER ECO 530
Adhesive for the mounting of rubber elements, with water-based dispersion and free of solvents.
Characteristics
- DW RUBBER ECO 530 is a water-based emulsion adhesive, free of VOC-s.
- DW RUBBER ECO 530 ensures a high adhesion even in non-porous surfaces...
Brand: Dast
|
|
|
DW SELFWETTING
Cement-based adhesive with a prolonged working time and quick solidifying time, for the adhesion of ceramic, gres, porcelain, etc, tiles.
CLASSIFICATION OF PRODUCT
DW SELFWETTING classified as C2FTE according to EN 12004, base C
cement, 2 adhesive with h...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW SYNTHETHIC ECO...
Fast drying, water-based dispersion adhesive for the adhesion of PVC-s, solvents-free.
Characteristics
- DW PVC ECO 110 is a synthetic, fast drying, water emulsion-based
adhesive, free of VOC - s.
- DW PVC ECO 110 has a high adhesiveness, even from th...
Brand: Dast
|
|
|
DW TEXTILE ECO 70
Bi-component, polyurethane-based varnish, with high resistance to consumption, for extremely high-traffic floors.
Characteristics
- DW Textile ECO 70 is a synthetic, fast drying, water emulsion-based adhesive, low emission of VOC - s.
- DW Textile ECO 70...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW URBAN 40
Cement-based, flexible adhesive for the adhesion of ceramic, gres,
porcelain, etc, tiles.
Product Classification
DW URBAN 40 is classified as C2TE S2 according to EN 12002 is classified as S2 high flexible adhesive, base C cement, 2 adhesive with high ad...
Brand: Dast
|
|
|
DW URBANLIGHT 40
Cement base tile adhesive, composed from special light weight filler, special cement, produced with Low Dust technology for the adhesion of all types of tiles even in non stable substrate, with improved opening quality.
Product Classification
DW URBANLIGHT ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
DW VETROSYSTEM
Adhesive for the adhesion and filling of joints in glass brick walls.
Product Classification
DW GRANDFIX is classified as C2TE according to EN 12004, base C
cement, 2 adhesive with high adhesive strength, T resistance to slip, and E prolonged working tim...
Brand: Dast
|
|
|
DW VINIL ECO 330
Adhesive for carpets mounting, with water-based dispersion and free of solvents.
Characteristics
-DW VINIL ECO 330 is a synthetic, fast drying, with water-based emulsion, and free of VOC-s.
- DW VINIL ECO 330 ensures a high adhesion even in the early sta...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADHESIVES |
|
|
PVC D887
Strong adhesive for PVC plastic pipes.
Characteristics
Strong adhesive for PVC plastic pipes, for water supply and sewage pipes. Resistant to temperature changes, cold and hot water, vibrations and time. The stable and ideal density of PVC adhesive enables ...
Brand: Dast
|
|
|
|
|
| |
|
| |
|
|
| |
|
|
| TILE GROUT AND PRODUCTS FOR JOINT TREATMENT |
 |
|
D 707 ULTRACOLOR
Elastic neutral silicone.
Characteristics
Silicone with great elasticity and high adhesiveness in porous surfaces. It is resistant to mold, bad weather conditions, UV rays, detergents, acid and salt water. It stabilizes quickly by reacting with moisture; ma...
Brand: Dast
|
|
|
EPOFUGA EFG-6700
Bi-component, epoxy adhesive and joints filler for walls and floors.
Description
EPOFUGA EFG - 6700 is a bi-component tile adhesive, epoxy-based, free of solvents. It is characterized by high resistance to compression, flexion and outstanding adhesive stren...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| TILE GROUT AND PRODUCTS FOR JOINT TREATMENT |
|
|
EPOFUGA GG 7700
Bi-component, epoxy-based, facilitated tiles stucco.
Characteristics
Bi-component stucco, free of diluents, with epoxy-based resins and facilitated salicyl inserts. It is resistant to acids, alkalis, strong cleaners, most of organic diluents and chlorinated...
Brand: Dast
|
|
|
FLEX PU - 40
Polyurethane-based silicone.
Characteristics
Mono-component, polyurethane-based, elastic joints mastic. It is mechanically resistant, does not anoint, and is resistant to snow and sun. It is not affected by water, being it salty or not. It can be coated and...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| TILE GROUT AND PRODUCTS FOR JOINT TREATMENT |
|
|
FLEX PU - 40 PLUS
Polyurethane-based silicone with extremely high resistance to chemicals.
Characteristics
Mono-component, polyurethane-based, elastic joints mastic. It is mechanically resistant, does not anoint, and is resistant to snow and sun. It is not affected by water,...
Brand: Dast
|
|
|
FUGA RAPID 3 - 20
Cement-based stucco, with quick drying time, high granulometry to fill 3 - 20 mm joints.
Characteristics
- It is a powder, cement-based material, with natural stone powder, synthetic resins, special hydrophobic additive and coloring pigments with high resi...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| TILE GROUT AND PRODUCTS FOR JOINT TREATMENT |
|
|
FUGA TAPE
Rubber tape to control the depth of silicone application into the dilatation joints.
Characteristics
Spherical and very flexible tape which is compressed without losing flexibility. It ensures movement of all types of silicones and is characterized by a sim...
Brand: Dast
|
|
|
FUGACOLOR
Stucco for filling cement-based joints, with selected granulometry and with a high resistance against water; it serves for the filling of 0 - 8 mm joints.
Technical features
-It is a powder, cement-based material, with natural stone powder of selected granu...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| TILE GROUT AND PRODUCTS FOR JOINT TREATMENT |
|
|
FUGAFLEX
Two component material. Component A is a cement-based, natural stone, synthetic resins and special pigments powder; component B is an elastomeric-based liquid for high resistance in compression and flexion, and high resistant towards chemical agents and washing deter...
Brand: Dast
|
|
|
GLITTER
Metallic colored glitter, polyester and aluminum-based
Area of application
Glitter is added to PREMIUM up to 10% in report with the product’s weight. Glitter is available in two colors, Silver and Gold. After complete mixing, it gives the product special de...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| TILE GROUT AND PRODUCTS FOR JOINT TREATMENT |
|
|
MEGAFUGA
Stucco for filling the cement-based joints, with selected granulometry and high resistance towards water. It serves for the filling of 3 - 20 mm joints.
Technical features
- It is a powder, cement-based material, with natural stone powder with selected gran...
Brand: Dast
|
|
|
NANOCOLOR
Stucco for filling cement-based joints, with selected granulometry and with a high resistance to water; it serves for the filling of 0 - 5 mm joints.
Technical features
-It is a powder, cement-based material, with natural stone powder of selected granulomet...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| TILE GROUT AND PRODUCTS FOR JOINT TREATMENT |
|
|
PREMIUM
Two component, epoxy-based tiles stucco.
Characteristics
Bi-component stucco with 30 prepared shades, free of diluents, with epoxy-based resins and thin salicyl inserts. It is resistant to acids, alkalis, strong cleaners, most of organic diluents and chlori...
Brand: Dast
|
|
|
|
|
| |
|
| |
|
|
| |
|
|
| HYDROINSULATION |
 |
|
AQUABLOCKER PU
Mono-component, polyurethane-based, ready to use waterproof.
Characteristics
AQUABLOCKER PU is a polyurethane-based, waterproofing coating material for terraces, with high content of polyurethane resins.
- Offers high waterproofing and elasticity.
- I...
Brand: Dast
|
|
|
BETOZOL
Waterproofing additive for concrete.
Description
BETOZOL is a liquid additive which gives concrete waterproof quality.
The product reacts chemically with the lime that is formed from hydration of cement and creates salts which, on the one side, block cap...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
DW IZOL
Elastic liquid waterproofing membrane.
Description
DW IZOL is a ready to use product, which is applied with brush or roller. After it gets dried, it creates a very elastic membrane, which is impervious from water and allows its evaporation.
Area of a...
Brand: Dast
|
|
|
EPOXY BITUM Z 877
Bitumen-based epoxy waterproof, with good adhesive properties and resistant to chemicals.
Characteristics
EPOXY BITUM Z 877 is a bitumen-based epoxy, waterproof, coating material.
- It provides a high waterproofing and elasticity.
- It is characterize...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
HIDROSTOP
Fast drying waterproof, to stop leaks.
Description
HIDROSTOP is a fast drying waterproof, after contact with water.
Area of application
HIDROSTOP is used to stop water leaks, thanks to its fast drying and adhesion qualities.
Manner of appli...
Brand: Dast
|
|
|
IZOBAND EX 90
Waterproof element to cover the angles of walls.
Unit of measurement: 10 ml /pcs box
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
IZOBAND IN 90
Waterproof element to cover the angles of walls.
Unit of measurement: 50 / pcs box
Brand: Dast
|
|
|
IZOBAND S10
Insulating band for the angles of walls and floors.
Unit of measurement: 10ml /box
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
IZOCARPET
Carpet that reinforces the waterproof of floors and walls.
Unit of measurement: 50 ml / roller
Brand: Dast
|
|
|
IZOCRYSTAL
Is a concrete waterproofing additive in powder form, added during the preparation of concrete, thus creating an insoluble and crystalline composition.
Characteristics
IZOCRYSTAL is a concrete waterproofing additive in powder form, added during the preparati...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
IZODRAIN
Reinforcing element used during the process of waterproofing for drains.
Unit of measurement: 10 pcs / box
Brand: Dast
|
|
|
IZOELASTIC
Two component, waterproof and cement-based material, elastic, with protective function for terraces, foundations, swimming pools and basements.
Characteristics
Two component, cement-based waterproof, with inerts of selected granulometry, special additives a...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
IZOELASTIC LIQUID
Is a painting, waterproofing material for terraces, with high content of elastomeric resins.
- It offers a high waterproofing and elasticity.
- It is characterized by excellent adhesive qualities in all cement-based surfaces, in surfaces made of bricks, wood or...
Brand: Dast
|
|
|
IZOFLEX
Two component, cement-based material, and elastic waterproof.
Characteristics
Bi-component, cement-based waterproof, with inerts of selected granulometry, special additives and synthetic polymers in water-dispersion. By mixing the two components, you will g...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
IZOGRAND ULTRA 880
Bi-component waterproof, with good adhesive properties and resistant to chemicals.
Characteristics
IZOGRAND ULTRA 880 is a bi-component, waterproof, coating material.
- It provides a high waterproof and elasticity.
- It is characterized by very good a...
Brand: Dast
|
|
|
IZOTAPE FU 280
Rubber-shaped material, with tensile properties for waterproofs in concrete joints.
Unit of measurement: 10 ml / box
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
IZOTAPE U 200
Rubber-shaped material, with expansive properties for waterproofs in concrete joints.
Unit of measurement: 10 ml /box
Brand: Dast
|
|
|
IZOTAPE ULTRA S 2...
Insulating band with a 20cm depth for dilatation joints insulation, which is used together with DW 9000 EPO-UNI adhesive.
Unit of measurement: 10 ml /box
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
IZOTAPE ULTRA S 3...
Insulating band with a 30cm depth for dilatation joints insulation, which is used together with DW 9000 EPO-UNI adhesive.
Unit of measurement: 10 ml /box
Brand: Dast
|
|
|
IZOTAPE XB 22
Rubber-shaped material, with tensile properties for waterproofs in objects joints.
Unit of measurement: 10 ml / box
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
IZOTRATE
Is a cement-based mortar. It is applied with a brush. It contains active chemicals, which when in contact with moisture and lime and lime hydroxide, enter a reaction, thus forming insoluble crystals. These crystals block the capillaries and cracks formed inside as a ...
Brand: Dast
|
|
|
IZOTUBE
Reinforcing element used during the process of waterproofing for exits of hydraulic installations, water tubes, etc, from the wall.
Unit of measurement: 10 pcs / box
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
MONOFLEX
Flexible, waterproofing, mono-component material, with good waterproofing and protective qualities.
Technical features
Dust, cement-based, mono-component material, with selected granulometry, synthetic resins, special additive and hydrophobic qualities. The...
Brand: Dast
|
|
|
MONOLIT
Cement-based, mono-component, waterproof mortar.
Characteristics
Cement-based, mono-component, waterproof mortar which possesses good isolating qualities to moisture and protects concrete from carbonizing. It is suitable to be used for the waterproofing of ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| HYDROINSULATION |
|
|
SEALEX FACADE PRO...
Silicone-based material, which contains solvent.
Characteristics
Silicone-based, hydro-resistant material, which contains solvent. It
retains its transparency and does not create “skin”, thanks to its great permeation (micro technology), thus ensuring su...
Brand: Dast
|
|
|
SEALEX FLOOR PROT...
Silicone-based material, which does not contains solvents.
Characteristics
Silicone-based, hydro-resistant material, which contains solvent. It retains its transparency and does not create “skin”, thanks to its great permeation (micro technology), thus ensu...
Brand: Dast
|
|
| |
|
| |
|
|
| |
|
|
| FLOOR LEVELERS |
 |
|
EPO DECOR 300
Polyurethane-based decorative coat which serves for the treatment of decorative floors.
Product classification:
EPO DECOR 300 is classified according to EN 998 – 1 standard.
Characteristics
For indoor and outdoor usage.
- High resistance to atmosph...
Brand: Dast
|
|
|
EPOFLOOR EC 0.3
Epoxy-based, three-component self-leveler.
Description
EPOFLOOR EC 0.3 is a leveling, epoxy-based resins product, and free of solvents. It offers the following advantages:
- High mechanical resistance.
- Very good adhesion with the area where it is ap...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FLOOR LEVELERS |
|
|
EPOFLOOR EC 08
Epoxy-based, three-component self-leveler.
Description
EPOFLOOR EC 08 is a leveling, epoxy-based resins product, and free of solvents. It offers the following advantages:
- Excellent mechanical resistance.
- Very good adhesion with the area where it i...
Brand: Dast
|
|
|
EPOFLOOR FG 8700
Epoxy-based, Two component self-leveler.
Description
EPOFLOOR FG – 8700 is a cement-based, and epoxy-based resins, leveling product, and free of solvents. It offers the following advantages:
- Excellent mechanical resistance.
- Very good adhesion with...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FLOOR LEVELERS |
|
|
EPOFLOOR UNI 8900
Epoxy-based, bi-component self-leveler.
Description
EPOFLOOR UNI 8900 is an epoxy-based resin, leveling product, and free of solvents. It offers the following advantages:
- Excellent mechanical resistance.
- Very good adhesion with the area where it i...
Brand: Dast
|
|
|
FLATEX
Cement-based, leveling mortar, for outdoor and indoor environments.
Technical features
– Cement-based mortar, with sand of selected granulometry and modified polymers.
– Serves to create a flat layer for the application of waterproofs and adhesives.
<...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FLOOR LEVELERS |
|
|
FLORCOAT FINAL
An acrylic-base resins in water dispersion, semi-flexible paint, for the coating of sports floors.
Characterristics
A semi-flexible, acrylic-base resins in water dispersion and filler-based of selected granulometry paint, for indoor and outdoor environments...
Brand: Dast
|
|
|
QUARTZ
Industrialized quartz sand, with scalable grain thickness.
Characteristics
Industrialized quartz sand, with scalable grain thickness, with a high hardness of 6-7 Mohs scale. It is chemically resistant and is not affected by the chemical qualities of synthet...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FLOOR LEVELERS |
|
|
TECNOFLOOR 10
Self-leveler with high content of cement and modified additives.
Description
TECNOFLOOR 10 is a cement-based self-leveler, with modified additives, which is used to lay and level floors. It is classified as CT - C40 - F10 - AR2 according to EN 13813 standar...
Brand: Dast
|
|
|
TECNOFLOOR 30
Self-leveler with high content of cement and modified additives.
Description
TECNOFLOOR 30 is a cement-based self-leveler, with modified additives, which is used to lay and level floors. It is classified as CT - C40 - F10 - AR2 according to EN 13813 standar...
Brand: Dast
|
|
| |
|
| |
|
|
| |
|
|
| FINISHES AND DECORATIVE COATINGS |
 |
|
ACRYL SPACHTEL
Plaster stucco produced based on nanotechnology, to realize smooth finishes in outdoor and indoor environments.
Technical features
-Plaster stucco, composed of white cement, hydrated lime, white marble powder, resins and special additives.
-Produces base...
Brand: Dast
|
|
|
BONIFIN
Powder material, with cement, hydrated lime, carbonate sand with selected granulometry, synthetic resins and special additives.
Technical features
- It is characterized by an excellent opening and workability, which
facilitates application in indoor and ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FINISHES AND DECORATIVE COATINGS |
|
|
DECOQUARTZ
Decorative coating that serves for the treatment of facades and indoor surfaces.
Product Classification
DECOQUARTZ is classified according to EN 998 – 1 standard.
FEATURES
- For indoor and outdoor use.
- High resistance to weather conditions.
-...
Brand: Dast
|
|
|
DECORTEX
Decorative silanated and ready to use coat, that serves for the treatment of facades and indoor surfaces. It is an ecologically tested product. Manufactured based on HTT technology (Hörman Transpirant Technology), it allows wall airing and mold prevention. Thanks to ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FINISHES AND DECORATIVE COATINGS |
|
|
FINO ANTIQUE
Product for finishes of antique view.
Technical features
Powder material produced based on HTT technology (Horman Transpirance Tecnology) which prevents mold creation and allows the transpiration of cement-based, hydrated lime, marble carbonate sand and mar...
Brand: Dast
|
|
|
FINO CLASSIC
It is a powder material, produced according to HTT technology (Horman Transpirance Tecnology) which prevents mold creation and allows the airing of cement-based, hydrated lime, marble carbonate sand and marble of selected granulometry, synthetic resins and special ad...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FINISHES AND DECORATIVE COATINGS |
|
|
GRAFIATO 1, 2, 3
Decorative coating that serves for the treatment of facades and indoor surfaces.
Product Classification
GRAFIATO is classified according to EN 998 - 1.
Features
- For indoor and outdoor use.
- High resistance to weather conditions.
- Good w...
Brand: Dast
|
|
|
GRAFIATO ACRYL
Decorative and ready to use coat, that serves for the treatment of facades and indoor surfaces. It is an ecologically tested product. Manufactured based on HTT technology (Hörman Transpirant Tecnology), it allows wall airing and mold prevention. Thanks to the new for...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FINISHES AND DECORATIVE COATINGS |
|
|
GRAFIATO SILEX
Decorative and ready to use coat, that serves for the treatment of facades and indoor silicone-based surfaces. It is an ecologically tested product. Manufactured based on HTT technology (Hörman Transpirant Tecnology) ), it allows wall airing and mold prevention. Than...
Brand: Dast
|
|
|
SPATORELLA
Plaster stucco for smooth finishes.
Technical features
-Plaster stucco, composed of white cement, hydrated lime, white marble powder, resins and special additives.
-Characterized by good workability and easy opening; without vertical slip, thus facilitat...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| FINISHES AND DECORATIVE COATINGS |
|
|
SPATORELLA GIPS
Stucco for filling joints between gypsum-board panels.
Technical features
-Gypsum-based stucco, composed of hydrated lime, marble powder of selected granulometryand special additives.
-Gypsum-based stucco, used together with the covering tapes to stucco ...
Brand: Dast
|
|
|
|
|
| |
|
| |
|
|
| |
|
|
| INDUSTRIAL MORTARS FOR MASONRY AND PLASTERING |
 |
|
MORTEL ANTIQUE
Cement-based with special additives mortar for stuccoing and finishes, giving an antique effect.
Description
MORTEL ANTIQUE is a pre-prepared, cement-based product, reinforced with modified polymers, without corrosive ingredients, suitable for
internal a...
Brand: Dast
|
|
|
MORTEL GP - 10 FA...
Fast drying, filling material for brick or block walls for indoor and outdoor environments.
Technical features
Powder material, with cement, lime, stone sand of selected granulometry, synthetic resins and special additives.
- It is characterized by an ex...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| INDUSTRIAL MORTARS FOR MASONRY AND PLASTERING |
|
|
MORTEL GP - 30
Basic filling material for brick or block walls for indoor and outdoor environments.
Technical features
Powder material, with cement, lime, stone sand of selected granulometry, synthetic resins and special additives.
-It is characterized by an excellent ...
Brand: Dast
|
|
|
MORTEL GP 10
Basic filling material for brick or block walls for indoor and outdoor environments.
Technical features
Powder material, with cement, lime, stone sand of selected granulometry, synthetic resins and special additives.
- It is characterized by an excellent...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| INDUSTRIAL MORTARS FOR MASONRY AND PLASTERING |
|
|
YTONG PUTZ +
Basic filling material for brick walls, for indoor and outdoor environments.
Technical features
Powder material, with cement, lime, carbonate stone sand with
selected granulometry, synthetic resins and special additives.
- It is characterized by an ex...
Brand: Dast
|
|
|
|
|
| |
|
| |
|
|
| |
|
|
| PRIMERS |
 |
|
BETON CONTACT
Bonding layer, used to treat smooth surfaces of concrete, for indoor and outdoor use.
Technical features
-Acrylic resin-base, liquid material used for the treatment of smooth concrete surfaces.
-It ensures a good bonding of concrete with the filling laye...
Brand: Dast
|
|
|
DW PRIMER
DW Primer is an acrylic resin -based primer, which is used to give the support the desired qualities before applying cement-based tiles adhesive.
Area of application
DW PRIMER can be applied as a primer layer in various supports, such as: old tiles, smooth ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRIMERS |
|
|
EPO METAL W 5300
Bi-component epoxy primer, water-based, with anti-corrosive properties.
Description
EPO METAL W 5300 is a bi-component, epoxy, water-based product. The product offers high physical and mechanical resistance, such as resistance to abrasion, resistance to wat...
Brand: Dast
|
|
|
EPOXY PRIMER W 40...
Water-based, two component, epoxy primer.
Description
EPOXY PRIMER W - 4000 is a water-based, bi-component, epoxy primer.
Is certified as a “Class II” for resistance to moisture, which makes it ideal for applications that are subject to negative pressure...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRIMERS |
|
|
EPOXY PRIMER W-800
Two component, water-based, epoxy PRIMER.
Description
EPOXY PRIMER W-800 is a bi-component, water-based, epoxy product. The product offers high physical and mechanical resistance, such as resistance to abrasion, resistance to water, acids, alkalis, petroleu...
Brand: Dast
|
|
|
FERRO PRIMER
Cement-based, non-corrosive primer, reinforcer of iron alloys in
construction structures.
Description
PRIMER FERRO can be applied as a reinforcer primer and protector in iron alloys, steel corrosion and rust, acting as a bonding layer between old concret...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRIMERS |
|
|
FERROPROTECT 908
Primer with penetrating and protective properties for metallic structures and for the treatment of concrete surfaces.
Features
Primer with penetrating and protective properties for metallic structures and for the treatment of concrete surfaces. Thanks to th...
Brand: Dast
|
|
|
FLOORCOAT PRIMARY
An acrylic-base resins in water dispersion primer, for the treatment of sports fields.
Features
An acrylic-base resins in water dispersion and filler-based of selected granulometry primer, for indoor and outdoor environments. Thanks to its formula, FLOORCOA...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRIMERS |
|
|
HYDRO PRIMER
Description
Elastomeric primer for surfaces where waterproof will be applied.
Aqueous polymer dispersion is applied on porous surfaces thus by significantly increasing adhesiveness between elastomeric-based hydro isolators and support.
HYDRO PRIMER has penet...
Brand: Dast
|
|
|
PU 88 PRIMER
Two component Polyurethane-Epoxy base primer.
Description
PU 88 Primer is a bi - component epoxy- based and water- based
product. The product offers high physical and mechanical resistance, such as resistance to abrasion, resistance to water, acids, alka...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRIMERS |
|
|
RESIN PRIMER RE 1...
Bi-component, water-based primer.
Description
RESIN PRIMER RE 1800 is a bi-component, water-based product. The product offers high physical and mechanical resistance, such as resistance to abrasion, resistance to water, acids, alkalis, petroleum products, e...
Brand: Dast
|
|
|
TECNOFIX
Leveling material for surfaces that will be coated with decorative layer.
Features
-It is a powder material, with cement, lime, sand of selected granulometry, hydrophobic synthetic resins and specific additive.
- It characterized by an excellent opening ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRIMERS |
|
|
TECNOFIX LIQUID
Characteristic
- Acrylic resin-based, liquid material, resistant to alkalis.
- Treatment of surfaces with Tecnofix Liquid provides excellent workability and notable facilitation in the application of decorative layers.
- Creates an excellent insulation and b...
Brand: Dast
|
|
|
|
|
| |
|
| |
|
|
| |
|
|
| PAINT AND VARNISH |
 |
|
EPO PAINT
Bi-component, epoxy-based product.
Description
Epo Paint is a bi-component, epoxy-based product, free of solvents, thus offering excellent strength and resistance to consumption.
This product is resistant to acids, bases, petroleum products, solvents, wa...
Brand: Dast
|
|
|
EPOXY VARNISH W 4...
Two component, water-based, epoxy varnish.
Description
EPOXY VARNISH is a bi-component, water-based, epoxy product. The product offers high physical and mechanical resistance, such as: resistance to corrosion, resistance to water, acids, alkalis, petroleum ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PAINT AND VARNISH |
|
|
FLOORCOAT PAINT
An acrylic-base resins in water dispersion paint, for marking indoor and outdoor sports fields.
Features
An acrylic-base resins in water dispersion and filler-based of selected granulometry paint, for indoor and outdoor environments. Thanks to the formula o...
Brand: Dast
|
|
|
PARQUET AQUA LINE
Two component, polyurethane-based varnish, with high resistance to consumption, for extremely high-traffic floors.
Features
Polyurethane-based varnish, for indoor and outdoor wood surfaces. Easily applied; manifests good elasticity and is laid in an excelle...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PAINT AND VARNISH |
|
|
PARQUET VARNISH
Mono-component, polyurethane-based varnish, with high resistance to consumption, for high-traffic floors.
Features
Polyurethane-based varnish, for indoor and outdoor wood surfaces. Easily coated; manifests good elasticity and is excellently laid. It is part...
Brand: Dast
|
|
|
PARQUET VARNISH U...
Two component, polyurethane-based varnish, with high resistance to consumption, for high-traffic floors.
Features
Polyurethane-based varnish, for indoor and outdoor wood surfaces. Easily coated; manifests good elasticity and is laid in an excellent manner. ...
Brand: Dast
|
|
| |
|
| |
|
|
| |
|
|
| ADDITIVES |
 |
|
BETO ACC
Accelerator for concrete drying and anti-freezing agent.
Description
Liquid additive that accelerates drying time and allows strengthening at low temperatures. It does not contain free chlorine or other irritating agents. It does not have any effect to the ...
Brand: Dast
|
|
|
BETO-RET
Retarder of the drying of concrete - Reducer of the amount of water and plasticizer.
Description
BETO - RET is a liquid additive that delays the drying of concrete, so extends the time in which the concrete has plasticity. At the same time, it reduces the a...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADDITIVES |
|
|
BETOPLAST
Plasticizer, Type A - additive for waterproofing in concrete preparation.
BETOPLAST is a liquid additive that acts as a plasticizer and waterproofing agent in concrete and, thus offering the following advantages:
- Significantly increases water impermeability i...
Brand: Dast
|
|
|
BETOPLAST PLUS
Plasticizer, Type A - additive for waterproofing in concrete preparation.
BETOPLAST PLUS is a liquid additive that acts as a plasticizer and waterproofing agent in concrete, thus offering the following advantages:
- Significantly increases water impermeability ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADDITIVES |
|
|
BETOZOL
Waterproofing additive for concrete.
Description
BETOZOL is a liquid additive which gives concrete waterproof quality. The product reacts chemically with the lime that is formed from hydration of cement and creates salts which, on the one side, block capill...
Brand: Dast
|
|
|
DW 17
Additive for adhesives of DW line and tile stuccos (fugacolor, megafuga).
Description
DW17 is an acrylic-based mixture which significantly improves properties of tile adhesives and stuccos.
- Significantly increases the adhesive ability to the support.
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADDITIVES |
|
|
FLEXIT
It is product with elastomeric contents which is used as an additive in adhesives and cement- based mortars, as well as to the mono-component sealant giving them the following properties:
- High flexibility
- impermeability to water
- Improved adhesive quali...
Brand: Dast
|
|
|
LATEX
Is an additive for the improvement cement- based mortars.
Description
Latex is a synthetic polymer, to improve the cement-based
mortar and concrete layers.
LATEX application
- As a bonding layer between old and new concrete or mortar.
- For ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADDITIVES |
|
|
PLASTOLIT
Mortar plasticizer- Lime substitute.
Description
Plastolit is a liquid product that gives plasticity, bonding strength and all lime advantages to cement-based mortar. It is the ideal supplement for the production of mortar for construction, plaster, weak la...
Brand: Dast
|
|
|
POLY FIBER 1.2
Mono-filament polypropylene fibers for the reinforcement of concretes and mortars.
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| ADDITIVES |
|
|
POLYFIBER 0.6, 1....
Polypropylene fibers with a length of 6mm, 12mm and 18mm, for strengthening and reinforcing concrete and mortar.
Brand: Dast
|
|
|
SEALEX FACADE & F...
Description
Polymeric emulsion, with good penetrating properties for waterproofing and stabilizing surfaces. Nano - molecular structure of the dispersion gives an excellent penetration into the surface. When applied on porous surfaces, this product protects the su...
Brand: Dast
|
|
| |
|
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
 |
|
ASPHALT REPAIR
Cold asphalt for road repair.
Features
Product is ready to be applied; it is cold bitumen-based for repairs of small holes in streets or sidewalks. It is characterized by high flexibility, does not create cracking due to its swelling coefficient. It has exc...
Brand: Dast
|
|
|
ELEKTRIKER GIPS
Gypsum-based adhesive, with rapid freezing for installing electrical boxes and pipes.
Technical features
Gypsum-based adhesive, with rapid freezing. Resistant to electrical shocks. Applicable in all types of absorbable supports and supports with high minera...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
EPO REPAIR ULTRA
Three-component, epoxy - cement based product, for repairs of concrete structures and anchoring metal structures.
Features
Three-component, epoxy - cement based product, for repairs of concrete structures and anchoring metal structures with high mechanical ...
Brand: Dast
|
|
|
EPOLOT HV 300
Bi-component, epoxy resin for injection, solvent free, thin liquid, zero shrinkage.
Features
Bi-component, epoxy resin for injection, solvent free, thin liquid, zero shrinkage. Its fluidity allows regulation of small cracks. It presents high adhesion in rei...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
EPOLOT LV 011
Bi-component, epoxy resin for injection, solvent free, thin liquid, zero shrinkage.
Features
Bi-component, epoxy resin for injection, solvent free, thin liquid, zero shrinkage. Its fluidity allows regulation of small cracks. It presents high adhesion in rei...
Brand: Dast
|
|
|
EPOLOT MV 130
Bi-component, epoxy resin for injection, solvent free, thin liquid, zero shrinkage.
Features
Bi-component, epoxy resin for injection, solvent free, thin liquid, zero shrinkage. Its fluidity allows regulation of small cracks. It presents high adhesion in rei...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
EPOWRAP AD 300
Epoxy-base, bi-component adhesive, super fluid, for fabrics with carbon fiber.
Features
EPOWRAP AD 300 is a bi-component, epoxy adhesive in fluid form.
After solidification, it ensures high adhesion with the support, excellent strength and increase of re...
Brand: Dast
|
|
|
EPOWRAP FG 200
Epoxy-base, bi-component adhesive, for fabrics with carbon fiber.
Features
EPOWRAP FG 200 is a bi-component, epoxy adhesive in the form of paste.
After solidification, it ensures high adhesion with the support, excellent strength and increase of resistan...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
EPOWRAP IM 400
Epoxy-base, bi-component adhesive, for tiles with carbon fibers.
Features
EPOWRAP IM 400 is a bi-component, epoxy adhesive in paste form.
After solidification, it ensures high adhesion with the support, excellent strength and increase of resistances in c...
Brand: Dast
|
|
|
EPOWRAP LEVEL 100
Bi-component, epoxy-based stucco.
Description
EPOWRAP LEVEL 100 is epoxy-based, bi-component stucco, without solvent, that offers very adhesion with surfaces and gives high physical - mechanical resistance. It is resistant to acids, alkalis, detergents, sea...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
EPOWRAP PRIMER
Bi-component, water-based primer.
Description
EPOWRAP PRIMER is a water-based, bi-component epoxy-base product. The product offers high physical and mechanical resistance, such as resistance to abrasion, resistance to water, acids, alkalis, petroleum produc...
Brand: Dast
|
|
|
FAST CEMENT
Special cement with quick drying.
Features
Fast Cement is cement with quick drying, which hardens as soon as it gets into contact with water.
Area of application
Fast Cement is used for quick repairs, fixing, anchoring, plastering of concrete or p...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
FIBREN GP 70
Cement-based, repairing mortar, with synthetic resins and special additives.
Features
Cement powder, for repairs with high mechanical resistance, for fillings up to a thickness of 60 mm / later, does not contract, for indoor and outdoor uses. It offers exce...
Brand: Dast
|
|
|
FIXATIV A11
Cement-based, quick drying mortar, for repairs of concrete structures and anchoring.
Features
Cement powder for repairs with high mechanical resistance, does not shrink, for indoor and outdoor use. It offers excellent workability, adhesion, resistance to fr...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
FIXATIV B22
Cement-based, quick drying mortar for anchoring metallic structures.
Features
Cement powder for repairs with high mechanical resistance, does not shrink, for indoor and outdoor use. It offers excellent workability, adhesion, resistance to freezing, strikes ...
Brand: Dast
|
|
|
FIXATIV C57
Cement-based, quick drying mortar for anchoring metallic structures.
Features
Cement powder for repairs with high mechanical resistance, does not shrink, for indoor and outdoor use. It offers excellent workability, adhesion, resistance to freezing, strikes ...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
FLOW GROUT FIBREN
Cement-based, quick drying mortar for repairs.
Features
Cement powder for repairs with high mechanical resistance, does not contract, for indoor and outdoor use. It offers excellent workability, adhesion, resistance to freezing, strikes and humidity. Thanks...
Brand: Dast
|
|
|
GP 70 FAST
Powder specifically for cement-based repairs that hardens quickly, with high resistances.
Features
This powder is specifically for cement-based repairs; it hardens quickly and has high resistances. Ideal for projects where speed in their execution or comple...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
UNIWRAP CFF 400
Carbon plates for structural strengthening.
Features
- Prefabricated tiles that consist of 100% one-way carbon fiber, found in an epoxy resin matrix
- In combination with EPOWRAP FG - 200 forms a composite material
- Strengthening of concrete structur...
Brand: Dast
|
|
|
UNIWRAP CFP 300
Fabric with carbon fibers for structural reinforcements of concrete.
Features
-Carbon fibers, steady in one direction
-Combination with epoxy resins EPOWRAP FG – 200 forms a composite material.
-Strengthening external structural elements and allows th...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
UNIWRAP WALL 200
Carbon fiber fabric for structural strengthening of buildings in seismic areas.
Features
- Carbon fibers that continue in one direction.
- In combination with epoxy resins EPOWRAP FG – 200, it forms a composite material.
- Strengthens external structu...
Brand: Dast
|
|
|
WALL GROUT FIX
Cement-based mortar with quick drying, for repairs of masonry joints.
Features
Cement dust for repairs with high mechanical resistance, no shrinkage, for internal and external use. It offers high workability, adhesiveness, resistance to frost, strikes and m...
Brand: Dast
|
|
| |
| |
|
|
| |
|
|
| PRODUCTS FOR REPAIR |
|
|
WHITE CEMENT
White cement with high physical and mechanical resistances.
Description
White cement with high physical and mechanical resistances, which is used for the production of concrete, mortar, different finishes, with or without pigment. It is a substance with gre...
Brand: Dast
|
|
|
|
|
| |
|
| |
|
|
| |
|
|
| SUPPLEMENTARY PRODUCTS |
 |
|
D-1500
Acetic silicone with adhesive properties on building materials, impermeable by water.
Brand: Dast
|
|
|
D-212
Acrylic silicone for general use, with adhesive and insulation properties.
Brand: Dast
|
|
| |
|
| |
 |
|
 |
| |
|
|
|
|
| Näyttää lisää >>> |
| |
|
|
| |
| |
